- Home
- Products
- LLumar Deluxe
- DL15G SR CDF


Switch between the untinted glass and the same view with this film fitted. View exterior turns the window round and shows the street side, so you can see how this film really looks from outside. The chip shows its measured 16% VLT. Photography is indicative; ask us for a physical sample against your own glass before you decide.
LLumar DL15G SR CDF
Special Order
LLumar DL15G SR CDF is a gray window film that transmits 16% of visible light, rejects 56% of total solar energy, reduces glare by 82%, and blocks more than 99% of ultraviolet rays.
Special Order. $750 minimum for the part of the project using this film. Please allow approximately 2 to 3 weeks for materials to arrive. Subject to availability.
LLumar DL15G SR CDF: Purpose and Appearance
LLumar DL15G SR CDF is a dark architectural window film developed for heat and glare control with understated gray, bronze, or green styling. With 16% visible light transmission on single-pane, 1/8-inch clear glass, it provides a deliberate balance between daylight and solar control. Its gray appearance helps designers, owners, and facility teams coordinate the glass with the surrounding architecture. The product is well suited to commercial glazing, privacy-oriented daytime applications, and exterior design goals, especially when untreated windows create comfort, glare, fading, or energy-management concerns.
Heat, Glare, and Daylight Performance
Under the manufacturer’s stated NFRC-based test conditions, DL15G SR CDF rejects 56% of total solar energy and reduces summer solar heat gain by 49%. This can help moderate hot spots near windows and may reduce cooling demand during sunny weather. The film also provides 82% glare reduction, which can improve comfort around televisions, computers, displays, work surfaces, and customer areas. Because it transmits 16% of visible light, the selected shade should be matched to the room’s daylight goals rather than judged by heat rejection alone.
UV, Infrared, and Interior Protection
The film blocks more than 99% of ultraviolet rays in the tested 300-380 nm range. Reducing UV exposure can help slow premature fading of flooring, furniture, fabrics, artwork, merchandise, and other finishes. No film can eliminate fading because visible light, heat, humidity, and material composition also contribute. DL15G SR CDF provides 53% infrared energy rejection and 65% selective infrared rejection under two different manufacturer measurements. These values are useful supporting indicators, while total solar energy rejected provides the broader measure of overall solar performance.
Reflectivity, Views, and Privacy
Visible reflectance is approximately 9% on the exterior and 8% on the interior. These figures help explain how noticeable the finished glass may appear from each side and how reflections may affect outward views. Daytime privacy can vary with lighting conditions, film shade, glass, and viewing angle, so it should never be guaranteed. Window film does not create nighttime privacy: when the interior is brighter than outside, blinds, shades, curtains, or another covering are required.
Professional Glass Review and Installation
DL15G SR CDF is designed for installation on the interior side of compatible glazing, but final suitability depends on glass type, pane configuration, coatings, edge condition, framing, orientation, shade, and local climate. Performance data is comparative and actual results vary by glazing system. OOVO Window Films can inspect the glass, compare model options within the Deluxe Series, and recommend a product aligned with the property’s comfort, appearance, and performance priorities. Professional preparation and installation also support a clean finish and dependable long-term performance. Request a residential or commercial assessment to evaluate your needs.
| Visible Light Transmission | 16% |
|---|---|
| Total Solar Energy Rejected | 56% |
| Glare Reduction | 82% |
| UV Protection | >99% |
| Solar Heat Gain Coefficient | 0.44 |
| Summer Solar Heat Gain Reduction | 49% |
| Visible Reflectance, exterior | 9% |
| Visible Reflectance, interior | 8% |
| Winter U-Value | 0.97 |
| Light to Solar Gain Ratio | 0.36 |
Measured by the manufacturer on 1/8in (3mm) Single Clear. Performance on your own glass depends on its type and thickness, which is why we check it on site.
OOVO does not sell window film online
Film is cut and fitted to the glass it goes on, so every job is quoted after someone has seen it. There is no cart here on purpose.
- Tell us the rooms. Send the glass you want treated and rough measurements, or just call and describe the problem.
- We visit and measure. We check the glass for compatibility and hold samples against your own window in your own light.
- You get a fixed price. Supplied and installed, no surprises on the day.
- We install and clean up. Then the manufacturer warranty and our labor warranty both start.
Manufacturer warranty
| Residential | 5-year limited manufacturer warranty |
|---|---|
| Commercial | 5-year limited manufacturer warranty |
Interior glass, installed by a LLumar dealer. Covers bubbling, corrosion, crazing, delaminating and peeling. Not transferable.
Source: Eastman LLumar/Vista warranty sheet SP1179, October 2024.
OOVO labor warranty
The manufacturer covers the film. We cover the installation. If the fault is in how it was fitted, we come back and put it right.
Covered twice over
Manufacturer warranty
Residential: 5-year limited manufacturer warranty.
Commercial: 5-year limited manufacturer warranty.
Interior glass, installed by a LLumar dealer. Covers bubbling, corrosion, crazing, delaminating and peeling. Not transferable.
Source: Eastman LLumar/Vista warranty sheet SP1179, October 2024.
OOVO labor warranty
Our own warranty on the installation itself, on every job we fit across the DFW Metroplex.